Shandong Luteng Building Equipment Co., Ltd.
Model No.: GT4-14E1
Type:: Straightener & Cutter
Voltage:: 380V 50Hz
Dimension(L*W*H):: 1500x700x950 Mm
Straighten The Diameter:: 5-12mm
Applicable Object:: Round Steel, Rebar
Cut Length:: 0.3mm-99m
Straightening Speed:: 35m/min
Packaging: WOODEN BOX
Place of Origin: SHANDONG
Supply Ability: 300set/month
Certificate: ISO ce
HS Code: 8462219000
Steel Bar Straightening-Cutting Machine
The steel straightening and cutting machine is one of the steel rebar processing machines. It is used for straightening and cutting the steel rebar with diameter below 14 mm.
It is composed of straightening tube, traversing mechanism, cutting mechanism, steel bar fixed length frame, frame and driving device.
The steel bar passing through the aligning cylinder is straightened. When the steel bar is adjusted to the predetermined length, the hammer head hammers on the knife rest to cut off the steel bar, and the cut steel bar falls into the material rack. Due to the action of spring, the cutter table returns to the original position to complete a cycle.
|Commodity:||Hydraulic Rebar Straightening and Cutting Mchine|
|Carton Size:||311x115x85 cm|
|Gross/Net Weight:||1500/0 kgs|
|Supplying Price:|| |
FOB SHANGHAI Port
Oil Pump Motor Power: 4KW-4P;
Cutting Motor Power: 4KW-4P;
Straightening Motor Power: 11KW-4P;
Operation way: Hydraulic digital control
Worry-saving: The main components can LAST FOR TEN YEARS which almost cost you nothing for maintenance.
Time-saving: TWO TIMES THE CUTTING NUMBER of the normal steel Bar Cutter.
Labor-saving: Cut different sizes of steel bar WITHOUT CHANGING the KNIFE.
Advantages of the products
The adoption of totally STEEL MADE GEAR, integral connecting rod, and HEAT TREATMENT and HARDNESS TREATMENT of the important parts of the machine together guarantee a long working time.
The thread type and ADJUSTABLE STOP GAUGE ensure the accuracy and immobility of positioning.
The separation of connecting rod and gear enable the machine undertake a reasonable stress. The connecting rod and gear can be DISASSEMBLED SEPARATELY which is convenient for maintenance.
The LARGE CUTTING STROKE ensures all standards of steel bar can be cut without changing the cutting blade.
Seriate cutting speed is 50times/min which improves 50% EFFICIENCY than normal cutters.
1. The advanced goaf is operated to check whether the bearing, hammer head, cutter or shear gear are normal.
2. Select appropriate aligning block, traction wheel groove and running speed according to the diameter of the steel bar.
The diameter of the aligning block should be 2-5 mm larger than the steel bar, and the width of the traction wheel groove should be the same as the diameter of the steel bar.
Transmission speed should be selected according to the diameter, large diameter should be selected slow, after adjustment qualified before feeding.
3. The end of the steel bar should be removed before feeding.
The steel reinforcement should first pass through the steel tube and then enter the guide tube and straightening tube, so as to prevent injuries from popping up when each steel plate is close to the straightening end.
4. After cutting off 3 or 4 steel bars, stop the steel bar to check the length. When the allowable deviation is exceeded, the limit switch or gauge plate should be adjusted.
5. If the steel bar is still slowly bent after straightening, it can gradually increase the offset of the aligning block until the straightening.
6. Steel bar shorter than 2 meters or larger than 9mm in diameter shall be straightened at low speed.
7. After operation, the finished products should be stacked, the site should be cleaned, the power supply should be cut off, the switch box should be locked, and lubrication should be done well.
Shandong Luteng Machinery Co., Ltd. is a professional Construction machinery, road machinery, earthwork machinery, engineering machinery manufacturer in China, which was established in 2002 and located in the hometown of Confucius and Mencius -Jining City, Shandong Province.It is one of the machinery manufacturing bases of China . Our main products are: CNC Stirrup Bending Machine, Double head bending machine, Cage Welding Machine.Construction machinery, roadmachinery, earthworkmachinery, engineering machinery,Drilling Rig machine, concrete machinery and so on.
The company has a strong research personnel, with rich experience and the production of innovative thinking. We are able to provide our customers top quality products, competitive price, fast delivery and satisfactory service.We also can customize non-standard machines according to your requirement.
Meanwhile, we can also offer overseas installation, training, maintenance, commissioning for each client and confirm they can operate Luteng machine properly and enjoy the high performance and best service during operation.
We sincerely welcome domestic and international public communication calls and inquiries.
Hopes our absolute sincerity cooperation, creates magnificently on the basis of mutual benefit, create brilliant!