Shandong Luteng Building Equipment Co., Ltd.
Model No.: ltlJ350
Model Number:: GLT150
Voltage:: 11 KW-4P
Dimension(L*W*H):: 1840*610*1020 Mm
Weight:: 450 Kg + 15 Kg
Straightening And Cutting Capacity:: 4mm-14mm
Place of Origin: SHANDONG
Supply Ability: 300set/month
Certificate: ISO ce
HS Code: 8461500090
CNC bar straightening hook integrated machine
This machine is set to adjust and cut. The integral hook machine, computer numerical control input, all the steel bar with hook at both ends can be formed at one time, and the Angle of the hook can be changed to 90 degrees, 135 degrees and 180 degrees.
The hook length is adjustable (5/7/10/15cm).
The length of bent steel bars ranges from the minimum 0.16m to the maximum 9M.
In addition to one-time forming curved hook, this machine can also be used as a high performance straightening and cutting machine, with the cutting speed up to 50 m/min.
The steel straightening and cutting machine is one of the steel rebar processing machines. It is used for straightening and cutting the steel rebar with diameter below 14 mm.
It is composed of straightening tube, traversing mechanism, cutting mechanism, steel bar fixed length frame, frame and driving device.
The steel bar passing through the aligning cylinder is straightened. When the steel bar is adjusted to the predetermined length, the hammer head hammers on the knife rest to cut off the steel bar, and the cut steel bar falls into the material rack. Due to the action of spring, the cutter table returns to the original position to complete a cycle
1. The advanced goaf is operated to check whether the bearing, hammer head, cutter or shear gear are normal.
2. Select appropriate aligning block, traction wheel groove and running speed according to the diameter of the steel bar.
The diameter of the aligning block should be 2-5 mm larger than the steel bar, and the width of the traction wheel groove should be the same as the diameter of the steel bar.
Transmission speed should be selected according to the diameter, large diameter should be selected slow, after adjustment qualified before feeding.
3. The end of the steel bar should be removed before feeding.
The steel reinforcement should first pass through the steel tube and then enter the guide tube and straightening tube, so as to prevent injuries from popping up when each steel plate is close to the straightening end.
4. After cutting off 3 or 4 steel bars, stop the steel bar to check the length. When the allowable deviation is exceeded, the limit switch or gauge plate should be adjusted.
5. If the steel bar is still slowly bent after straightening, it can gradually increase the offset of the aligning block until the straightening.
6. Steel bar shorter than 2 meters or larger than 9mm in diameter shall be straightened at low speed.
7. After operation, the finished products should be stacked, the site should be cleaned, the power supply should be cut off, the switch box should be locked, and lubrication should be done well.
Shandong Luteng Machinery Co., Ltd. is a professional Construction machinery, road machinery, earthwork machinery, engineering machinery manufacturer in China, which was established in 2002 and located in the hometown of Confucius and Mencius -Jining City, Shandong Province.It is one of the machinery manufacturing bases of China . Our main products are: CNC Stirrup Bending Machine, Double head bending machine, Cage Welding Machine.Construction machinery, road machinery, earthwork machinery, engineering machinery and so on.
The company has a strong research personnel, with rich experience and the production of innovative thinking. We are able to provide our customers top quality products, competitive price, fast delivery and satisfactory service.We also can customize non-standard machines according to your requirement.
Meanwhile, we can also offer overseas installation, training, maintenance, commissioning for each client and confirm they can operate Luteng machine properly and enjoy the high performance and best service during operation.
We sincerely welcome domestic and international public communication calls and inquiries.
Hopes our absolute sincerity cooperation, creates magnificently on the basis of mutual benefit, create brilliant!
Shandong Luteng Machinery Co., Ltd. is a professional Construction machinery, road machinery, earthwork machinery, engineering machinery manufacturer in China, which was established in 2002 and located in the hometown of Confucius and Mencius -Jining City, Shandong Province.It is one of the machinery manufacturing bases of China . Our main products are: CNC Stirrup bending machine, Double head bending machine, Cage welding machine.Construction machinery, roadmachinery, earthworkmachinery, engineering machinery,Drilling Rig machine, concrete machinery and so on.
|Bar Bender||Steel Bar Bender|
|CNC Rebar Bender|
|Rebar Spiral Bender|
|Steel Bar Arc Bender|
|Bar Cutter||Steel Bar Cutter|
|Steel Bar Straightening and Cutting Machine|
|Portable Rebar Cutter|
|Stirrup Bender||CNC Steel Bar Stirrup Bender|
|CNC Wire Bending Machine|
|CNC Cage Making Machine|
|CNC Rebar Bending Center|
|Steel Bending Center||Vertical Bar Bending Center|
|Horizontal Bar Bending Center|
|Rebar Shear Line||CNC Shearing Line|
|Rebar Cutting Line|
|Cold Bending Machine||I-steel Cold Bending Machine|
|H Beam Steel Bending Machine|
|Five Head Bender||5 Head Reinforced Steel Bender|
|Cnc 5 Head Rebar Stirrup Machine|
|Double Head Bender||double Head Reinforced Steel Bender|
|Cnc double Head Rebar Stirrup Machine|
|Rebar Spring Machine||Steel Spring Making Machine|
|Steel Wire Spring Making Machine|
|Rebar Tier||Rebar Tying Tool|
|Automatic Rebar Tier|